DIY Duel Cup Holder for the Polestar 2 EV: Using 3D Printing

The Polestar 2 Cockpit Conundrum: Lack of Cup Holders

One of the most significant issues people have with the cockpit of the Polestar 2 is the lack of cup holders. Yes, there is a second cup holder, but it is inconveniently tucked behind the armrest. Most of the time I drive the Polestar by myself and since it's only me the lack of cup holders is not an issue. However, there has been the odd occasion where having that easily accessible second cup holder would have been nice.

Finding a Model and Learning to Use Blender and Fusion 360

I wanted to work with modeling software as well as find something fun to 3d print. I found a Polestar 2 cup holder model (remixed here) that needed to have 2 parts joined. I figured I would use this as a prompt to work with Blender. I struggle with Blender and looked up tutorials on how to complete this simple task. I made slow progress and still had some issues. So after some frustration, I tried Fusion 360, but for whatever reason, it lagged on my computer. I ended up using the slicer program to quickly join the 2 parts as that worked the fastest and easiest. I was also able to very quickly put a face on the ground plate to quickly orient it for printing.

3D Printing and Cost Savings

I will be using my Ender 3 Pro to print this model. It is fairly stock except for the CR Touch, a Creality Glass bed, and stiffer leveling springs. I have gray PLA that I will use as well.  The print looks like it's going to take about 16 hours and cost a little under $6 in the filament. I'd expect an accessory like this could cost upwards of $30 if manufactured and purchased at a retailer. So being able to make it at home for dirt cheap is neat. I'm printing it at a .24 layer height and with a 10% infill just to keep filament usage down. I will also be using snug support.

The Results

The print turned out pretty good, after removing the supports and giving it a quick sand down. I probably will not keep this print in place when solo driving, however, it could be helpful during road trips. That being said, it does not fit larger cans such as a Yeti Tumbler. Though, soda cans do fit well.

Despite the initial struggles with using Blender and Fusion 360, I successfully 3D printed a cup holder for my Polestar 2 EV. Not only was it a fun and rewarding project, but it also saved me some money compared to purchasing a manufactured accessory. I look forward to continuing to improve my modeling software skills and 3D printing projects in the future.

Aftermarket Cup Holders: An Alternative

If you don't have access to a 3D printer or don't want to take the time and effort to print your own cup holder, there are other options available. One popular option is to purchase an aftermarket accessory that can fulfill the role of a second cup holder.

This post contains affiliate links. If you use these links to buy something, we may earn a commission. Thanks.